Just updated: Datasheets now include a Dimensional specifications page (height, outer Ø, TE band Ø, top thickness). If you downloaded earlier, please hard-refresh (Ctrl/Cmd + Shift + R) and re-download to get the latest version.
Water (5 formats), CSD (2), Oil (2), Food & Dairy (3) — produced on the same integrated platform as PET preforms and bottles. HDPE, LDPE & PP materials. +360 million units per month.
Delta El Nile for Industry closure portfolio — twelve formats, one platform.
Product Finder
Find your exact SKU in 60 seconds
Filter 66 production SKUs by application, neck finish, weight, color and quantity. Get instant container loading + RFQ.
Plastic cap & closure manufacture in Egypt — PE cap factory serving the Middle East & Africa
As a leading plastic cap manufacturer and closure factory in Egypt, Delta El Nile for Industry produces PE closures (HDPE, LDPE and PP) for beverage, dairy, edible-oil and FMCG brands across Africa and the Middle East. Our cap manufacture facility in New Salhiya City operates 12 dedicated injection lines producing 360 million plastic caps per month — one of the largest closure manufacturers in MENA. Every plastic bottle cap is produced under FSSC 22000 V6 with IMD 6-camera vision inspection on every unit.
PET caps & closures supplier across Egypt, the Middle East, the GCC and Africa.
Delta El Nile for Industry ships PCO 1881, 29/25, 33/15, 29/21, 38mm, 48mm and 55mm closures to beverage, dairy, edible-oil and FMCG bottlers in 17+ export markets. Logistics out of Alexandria and Port Said cover the Red Sea, the Eastern Mediterranean and West Africa. Audit-ready documentation (FSSC 22000 V6, ISO 9001, ISO 14001, ISO 45001), CoA per lot, and IMD inspection reports available on request.
Precision injection lines, IMD 6-camera inspection — every closure, in-line.
Delta El Nile for Industry's closure production runs on advanced injection lines and precision molds, integrated with IMD 6-camera inspection systems for real-time quality control. Each closure is checked across multiple critical points before it leaves the line — helping detect contamination, deformation, color variation, surface defects, thread issues, tamper-band defects, sealing-area abnormalities, and pinholes.
Combining this in-line inspection with advanced injection platforms, Delta El Nile for Industry delivers the closure quality required by PepsiCo, Coca-Cola, Nestlé, Danone, and Henkel — with reject rates, cavity-to-cavity consistency, and per-shift QC documentation that pass FSSC 22000 V6 third-party audit.
Yes — all closure formats are engineered to standard neck finishes used across the global beverage and FMCG industries. PCO 1881 closures fit any standard PCO 1881 preform/bottle from any supplier. 29/25 water closures are interchangeable. 33/15 juice & milk closures meet the standard. The benefit of sourcing from Delta El Nile for Industry is that our closures are validated against our preforms, but they remain compatible with mixed-supplier setups.
1-piece (1.5g): a flip-top closure for direct-pour edible oil applications. Single-shot moulding, lower cost, suited for standard fill speeds. 2-piece (3.65g, HDPE): a tamper-evident two-component closure with a more secure seal and better drip control. The 2-piece is preferred when premium presentation, anti-counterfeiting, or controlled pour are priorities.
Yes — the 33/15 (juice & milk) and 38 mm (wide-mouth dairy/juice/specialty) closures are validated for cold fill, standard fill, and aseptic fill applications. The Material flow during injection moulding and the resin certification trail support the migration testing requirements for aseptic packaging. Customers using HTST or UHT processes have validated our 33/15 and 38 mm closures in production.
Most Delta El Nile for Industry closures are manufactured from food-grade HDPE — 29/25 water, PCO 1881 CSD, 33/15 juice & milk, 38 mm dairy (aseptic), 37 mm press-on, 48 mm water (incl. handle), 1-piece 29/21 edible oil. The 55 mm 5-gallon standard and foam-liner closures use LDPE. The 2-piece 29/21 oil closure uses HDPE for the main body and LDPE for the inner sealing component. The 55 mm Lid (can-lid format) uses PP. Material selection depends on the closure format, sealing function, and application requirements. All resins are FDA / EFSA food-contact compliant.
